Blusafe Solutions
Blusafe Latch — Adjustable 60 / 70 mm
Blusafe Latch — Adjustable 60 / 70 mm
Ordinarie pris
€13,95 EUR
Ordinarie pris
Försäljningspris
€13,95 EUR
Skatter ingår.
Det gick inte att ladda hämtningstillgänglighet
Kvantitet
GENUINE BLUSAFE PART
The latch behind every Breeze and Contour.
The exact adjustable 60 / 70 mm tubular latch that ships with every Blusafe Breeze and Contour — strike plate, dust box and screws in the pack. Drop it in and your smart lock feels brand new again.
Fits Breeze & Contour60 / 70 mm backsetStrike plate & dust box includedFits in minutes
Your Breeze or Contour does the clever part — fingerprint, app, code. This is the hardworking bit behind the handle that actually holds the door: the same adjustable tubular latch that ships in every Blusafe box, now available on its own. Swap out a tired or damaged latch, fit your lock to a second door, or take the handle with you when you move — without hunting for a part that "should" fit. It is compatible with the Blusafe Contour and Breeze — and if you're not sure whether it will work for you, message us for advice before you order.
One latch, two backsets. The body telescopes between 60 mm and 70 mm, so it covers the doors the Breeze and Contour are built for. The strike plate, dust box and fixing screws come in the pack — door side and frame side sorted in a single order, with no trip to the hardware shop.
Key features at a glance
Internal Door
External Door
Timber Door
Key features
✓Adjustable 60 / 70 mm backset
pull to 70 mm, push to 60 mm — one part covers both common UK backsets
✓Made for Breeze and Contour
not a "near enough" generic — the latch Blusafe ships in the box, with the right spindle follower and fixing centres
✓Complete pack
latch, strike plate, dust box and screws — open the bag and you are ready to fit
✓Satin stainless finish
a clean satin stainless faceplate and strike plate that sit neatly at the door edge under Black, Satin Chrome or Brushed Nickel handles
✓Straight swap
two screws out, two screws in — no new holes on a door already cut for the lock, and the spring-loaded bolt snaps home from day one
DIMENSIONS
Every measurement you need is on the dimension drawing in the photos above — faceplate, bolt, body and both backset positions, plus a quick guide to checking the backset on your own door. Measuring for a like-for-like swap takes thirty seconds.
What's in the box
✓ 1 × Adjustable tubular latch (60 / 70 mm)
✓ 1 × Strike plate
✓ 1 × Dust box (latch keep)
✓ Fixing screws for latch and strike plate
Works with
Blusafe Breeze, Breeze Rose and Breeze Long Backplate fingerprint handles, and Blusafe Contour and Contour V smart locks — in Black, Satin Chrome or Brushed Nickel. The latch is identical across the whole range — only the handle on the outside changes.
NOT SURE IT FITS?
Measure from the edge of the door to the centre of the handle spindle hole. 60 mm or 70 mm and you're covered. Anything else, or if you're stuck at any point, just ask — send us a photo of your door edge and we'll confirm the right part before you spend a penny.
Frequently asked questions
Is this the same latch that came with my Breeze or Contour?
Yes — it's the adjustable tubular latch supplied in the box with both locks, so it drops into the existing cut-out and lines up with the handle spindle and fixing screws.
How do I switch between 60 mm and 70 mm?
Hold the faceplate and pull the rear of the latch body outwards until it clicks into the 70 mm position; push it back in for 60 mm. Do this before fitting, then check the spindle hole in the latch sits centrally in the door bore.
What size is the faceplate, and will it fit my existing cut-out?
The faceplate is 25 mm wide by 57 mm long with radius ends and 41 mm screw-hole centres — the standard tubular latch footprint. If your door already has a Breeze or Contour fitted, it drops straight into the same recess. The full dimension drawing is in the photo gallery.
Does it include the handle?
No — this is the latch, strike plate and dust box only. The Breeze and Contour handles are sold separately and already include one latch.
Will it work with a different smart lock or a standard lever handle?
It is made and tested for the Blusafe Breeze and Contour. Other tubular-latch handles with a matching spindle may fit, but we can't guarantee it — ask us with the make and model and we'll tell you.
My door is uPVC with a lift-up handle. Is this the right part?
No — that's a multipoint door and uses a different mechanism. This latch is for standard latch doors. For multipoint doors look at the Origin Smart Plus or Apollo.
Free UK Delivery ● UK-Based Support ● Stuck at any point? Just ask
Blusafe UK
Product Security
How to report a security vulnerability and how long Blusafe connectable products receive security updates.